Which epoxy paint is applied?

The epoxy coating is applied as a protective coating and decorative paint on cementitious substrates (concrete, cement mortar, etc.) as well as on horizontal and vertical steel surfaces.

APPLICATIONS

Epoxy paint is recommended for:

• Production areas

• Car Stations

• Factories

• Fuel stations

• Storage areas

• As well as for anti-corrosion protection of metal structures

ADVANTAGES

• High mechanical strength

• Elasticity to bridging cracks

• Adhesion to the substrate

• Ability to create a glossy, matte and non-slip surface

• Resistance to acidic alkalis, oils and solvents.

APPLICATION

1.SUBSTRATE

The substrate must be free of substances that prevent adhesion such as oil, rust,

Preparation of the substrate consists sanding or sandblasting, etc. depending on the condition of the substrate.

Especially cement-based substrates should not contain more than 4% moisture and have a surface strength greater than 1.5 N /mm2

2. PRIMER

After preparing the substrate, the surface should be coated with a suitable primer to seal the pores and capillaries and create a sound surface for application of the epoxy coating.

The amount of primer required depends on the absorbency of the surface.

3 APPLICATION

Epoxy materials are two components:

A (Resin) and B (Hardener)

They are mixed with this ratio in a third vessel with a low-speed drill and the homogenized mixture is applied with a brush, roller or airless spray